Home > QSFP+ Optical Transceiver >

40GBASE SWDM4 QSFP+ 850nm~940nm MMF Optical Transceiver 350m DOM Duplex LC

Product Categories

GPON SFP Transceiver [63]
EPON SFP Module [39]
SFP+ Optical Transceiver [182]
100G QSFP28 Transceiver [43]
SFP28 Optical Transceiver [48]
QSFP+ Optical Transceiver [42]
100G CFP Module [5]
Active Optical Cable [17]
Direct Attach Cable [47]
CISCO Compatible Transceivers [158]
HP SFP Module [71]
Video SFP Transceiver [59]
Fiber Channel Module [37]
1x9 Optical Transceiver [32]
CSFP [32]
Optical SubAssembly [27]
Other Optical Transceiver Module [23]

Shenzhen Gigaopto Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

40GBASE SWDM4 QSFP+ 850nm~940nm MMF Optical Transceiver 350m DOM Duplex LC

Ask Lasest Price
Brand Name :	Gigaopto
Model Number :	GTQ-L08A4-02DC
Certification :	CE, FCC, ROHS, ISO9001, ISO14000, MSDS, REACH, CP65, TUV, UL
Price :	negotiable
Payment Terms :	T/T, L/C
Supply Ability :	5,000pcs/month
Delivery Time :	1-5 work days

Add to Cart

Product Details
Company Profile

40GBASE SWDM4 QSFP+ 850nm~940nm MMF Optical Transceiver 350m DOM Duplex LC

Based on an industry multi-standard agreement (SWDM-MSA), more open interoperability than other proprietary solution like QSFP-SR-BD

Cost effectively bandwidth upgrading from 10G to 40G without changing existing fibers

Description

The GTQ-L08A4-02DC is a kind of pluggable optical transceiver uses SWDM (Short Wavelength Division Multiplex) technology working with multimode fiber, providing 4 channels in the 850-940nm region at 10Gbps/lanes, which can transmit a multiplexed 40G signal over wide band OM5 at lengths up to 440m(240m on OM3/350m on OM4) with an duplex LC connector.

Uses two fibers (duplex) instead of eight (SR4), this 40G SWDM4-S is a more cost effective transceiver solution for 10G to 40G migration applications.

The QSFP+ 40Gbase-SWDM4 transceivers are compliant with the QSFP+ MSA and IEEE 802.3ba XLPPI electrical interface.

Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA.

Specification

Product Category	40Gbase SWDM4	P/N	GTQ-L08A4-02DC
Form Factor	QSFP+	Data-Rate	41.2Gbps (4×10.3Gbps)
Link Distance	440m@OM5/350m@OM4/240m@OM3	Media Type	MMF
Wavelength (CH1-CH4)	850nm, 880nm, 910nm, 940nm	Connector	LC Duplex
Power Supply Voltage	+3.3V (typical)	Power Consumption	≤ 3.5W
Transmitter Type	850mm VCSEL	Receiver Type	PIN
Transmitter Power	-7.5 ~ +3dBm	Receiver Sensitivity	< -9.1dBm
Extinction Ratio	> 2dB	DOM/DDM	support
Environment	Operating: 0 to 70°C	Warranty	3 years
Environment	Storage: -40°C to 85°C	Compliant	CE/FCC/RoHS
Protocols	40G Ethernet, SFF-8436, SFF-8636, MSA Compliant

Feature

Compliant with QSFP+ MSA
Compliant with SWDM MSA
Compliant with SFF-8636
Compliant with IEEE 802.3ba
Hot-pluggable QSFP+ form factor
4x10Gb/s VCSEL-based SWDM transmitter
Supports 41.2Gbps aggregate bit rate
Power dissipation<3.5W
Maximum link length of 240m on OM3 MMF and 350m on OM4 MMF
Case temperature range of 0°C to 70°C
Duplex LC receptacles
XLPPI electrical interface
RoHS compliant

Applications

40G Ethernet over Duplex MMF
Allows upgrades from 10GBASE-SR without changing fiber plant

Optical Characteristics

Transmitter electrical input signal charactoristics(TP1)	Min	Typical	Max	Units	Conditions
Single ended input voltage tolerance	-0.3		4	V	Referred to TP1 signal common
AC common-mode input voltage tolerance	15			mV	RMS
Differential input return loss	See 86A.4.1.1			dB	10MHz to 11.1GHz
Diffrential to common-mode input return loss	10			dB	10MHz to 11.1GHz
J2 Jitter tolerance	0.17			UI
J9 Jitter tolerance	0.29			UI
Data Dependent Pulse Width Shrinkage(DDPWS) tolerance	0.07			UI
	Specification values
Eye mask coordinates: X1,X2 Y1,Y2	0.11,0.31 95,350			UI mV	Hit Ratio=5E-5
Crosstalk calibration signal VMA	850			mV	While calibrating com-pliance signal
Crosstalk calibration signal transition times, 20% to 80%	34			ps	While calibrating com-pliance signal
Receiver electrical output signal charactoristics(TP4)	Min	Typical	Max	Unit
Single ended output voltage tolerance range	-0.3		4	V	Referred to signal common
AC common-mode output voltage (RMS)			7.5	mV
Termination mismatch at 1MHz			5	%
Differential output return loss	See 86A.4.2.1			dB	10MHz to 11.1 GHz
Common-mode output return loss	See 86A.4.2.2			dB	10MHz to 11.1 GHz
Output transition time,20% to 80%	28			ps
J2 Jitter output			0.42	UI
J9 Jitter output			0.65	UI
	Specification values
Eye mask coordinates: X1,X2 Y1,Y2	0.29,0.5 150,425			UI mV	Hit ratio=5E-5
Crosstalk source VMA, each lane	700			mV	At TP1a
Crosstalk source transition times,20% to 80%	37			PS	At TP1a

Electrical Characteristics

Transmitter electrical input signal charactoristics(TP1)	Min	Typical	Max	Units	Conditions
Single ended input voltage tolerance	-0.3		4	V	Referred to TP1 signal common
AC common-mode input voltage tolerance	15			mV	RMS
Differential input return loss	See 86A.4.1.1			dB	10MHz to 11.1GHz
Diffrential to common-mode input return loss	10			dB	10MHz to 11.1GHz
J2 Jitter tolerance	0.17			UI
J9 Jitter tolerance	0.29			UI
Data Dependent Pulse Width Shrinkage(DDPWS) tolerance	0.07			UI
	Specification values
Eye mask coordinates: X1,X2 Y1,Y2	0.11,0.31 95,350			UI mV	Hit Ratio=5E-5
Crosstalk calibration signal VMA	850			mV	While calibrating com-pliance signal
Crosstalk calibration signal transition times, 20% to 80%	34			ps	While calibrating com-pliance signal
Receiver electrical output signal charactoristics(TP4)	Min	Typical	Max	Unit
Single ended output voltage tolerance range	-0.3		4	V	Referred to signal common
AC common-mode output voltage (RMS)			7.5	mV
Termination mismatch at 1MHz			5	%
Differential output return loss	See 86A.4.2.1			dB	10MHz to 11.1 GHz
Common-mode output return loss	See 86A.4.2.2			dB	10MHz to 11.1 GHz
Output transition time,20% to 80%	28			ps
J2 Jitter output			0.42	UI
J9 Jitter output			0.65	UI
	Specification values
Eye mask coordinates: X1,X2 Y1,Y2	0.29,0.5 150,425			UI mV	Hit ratio=5E-5
Crosstalk source VMA, each lane	700			mV	At TP1a
Crosstalk source transition times,20% to 80%	37			PS	At TP1a

Digital Diagnostic Monitoring Specifications

Parameters	Unit	Specification
Temperature Monitor	°C	± 3
Voltage Monitor	V	± 5 %
I_bias Monitor	mA	± 10 %
Received Power (Rx) Monitor	dB	± 3.0
Transmit Power (Tx) Monitor	dB	± 3.0

Mechanical Dimensions

Product Tags:


*From:	Your email address is incorrect!
*To:	Shenzhen Gigaopto Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!